Section Links :
| Home Page Specification Our Grades |
: : : |
Pressure Vessel Steel Home Page ASME SA285 ASME SA285 Grade C |
ASME SA285 Grade C is a low to intermediate tensile strength pressure vessel grade steel. Used in the fabrication of pressure vessels and boiler tanks, SA285 Grade C should not be considered for use in high pressure applications.
The material has good weldability under conventional methods using fusion welding. Plates supplied to this standard are normally delivered 'as rolled' unless otherwise specified.
Masteel UK Limited can ship ASME SA285 Grade C plates from stock to destinations worldwide. Please refer to the technical information below...
Table 1: Chemical & Mechanical Values for ASME SA285 Grade C
| C | Si | Mn | P | S | Al | Cr | Cu | Ni | Mo | Nb | Ti | V | Tensile N/mm² |
Yield N/mm² |
| 0.16 | 0.35 | 0.4/1.2 | 0.03 | 0.03 | 0.02 | 0.3 | 0.3 | 0.3 | 0.08 | 0.01 | 0.03 | 0.02 | 360/480 | 235 |
(Maximum values unless stated otherwise. Yield value is minimum)
(Please note: the technical information above is for guidance only – for exact specifications please check with our Sales Team)
To find out more about ASME SA285 Grade C and to receive a competitive quotation, please click here and contact our Sales Team today.
Equivalent grades :
Request a Callback :
Want to know more? Fill in the form below and click the button to contact us and we will call you right back...
| * Your name | : | |
| * Your company | : | |
| * Telephone no. | : | |
| * Country | : | |
| Steel required | : | |
|
|
Masteel UK Limited,
The Cedars, Coton Road,
Nether Whitacre, Coleshill,
Birmingham, West Midlands
B46 2HH
t: +44 (0)1675 437733
f: +44 (0)1675 437734
email: enquiries@masteel.co.uk
website: www.masteel.co.uk
blogsite: www.masteel.ning.com