Section Links :
An ideal steel for use in moderate to lower working temperatures, ASME SA516 Grade 60 is used in the fabrication of weldable industrial boilers and steel pressure vessels.
It is a normalized steel which is known for its excellent notch toughness and weldability and is primarily found in pressurised service throughout the oil, gas and petrochemical industry.
At Masteel UK Limited, we carry a significant volume of ASME SA516 Grade 60 carbon steel plates in stock which we ship to our clients worldwide. These plates come with mill certification and are hard stamped so are fully traceable.
Please refer to the data tables below for further information.
(Maximum values unless stated otherwise)
(Minimum values unless stated otherwise)
(Please note: the technical information above is for guidance only – for exact specifications please check with our Sales Team)
To find out more about ASME SA516 Grade 60 and to receive a competitive quotation for the supply of this material, please CLICK HERE to contact us.
Want to know more? Fill in the form below and click the button to contact us and we will call you right back...
Please click on one of the links below...
Masteel UK Limited,
The Cedars, Coton Road,
Nether Whitacre, Coleshill,
Birmingham, West Midlands
B46 2HH
t: +44 (0)1675 437733
f: +44 (0)1675 437734
e–mail: enquiries@masteel.co.uk
website: www.masteel.co.uk
blogsite: www.masteel.ning.com
| Home Page Specification Our Grades |
: : : |
Pressure Vessel Steel Home Page ASME SA516 ASME SA516 Grade 60 | ASME SA516 Grade 65 | ASME SA516 Grade 70 |
An ideal steel for use in moderate to lower working temperatures, ASME SA516 Grade 60 is used in the fabrication of weldable industrial boilers and steel pressure vessels.
It is a normalized steel which is known for its excellent notch toughness and weldability and is primarily found in pressurised service throughout the oil, gas and petrochemical industry.
At Masteel UK Limited, we carry a significant volume of ASME SA516 Grade 60 carbon steel plates in stock which we ship to our clients worldwide. These plates come with mill certification and are hard stamped so are fully traceable.
Please refer to the data tables below for further information.
Table 1: Chemical Composition of ASME SA516 Grade 60
| Carbon (C) | % | Manganese (Mn) | % | Phosphorus (P) | % |
|
12.5mm or less 12.5 - 50mm 50 - 100mm 100 - 200mm > 200mm |
0.21 0.23 0.25 0.27 0.27 |
12.5mm or less • Heat Analysis : • Product Analysis : Over 12.5mm • Heat Analysis : • Product Analysis : |
0.60-0.90 0.55-0.98 0.85-1.20 0.79-1.30 |
(max) | 0.035 |
| Sulphur (S) | % | Silicon (Si) | % | ||
| (max) | 0.035 | • Heat Analysis : • Product Analysis : |
0.15-0.40 0.13-0.45 |
||
(Maximum values unless stated otherwise)
Table 2: Mechanical Properties of ASME SA516 Grade 60
| Description | Grade 60 |
|
Tensile strength (ksi) Tensile strength (MPa) Yield strength (ksi) Yield strength (MPa) Elongation in 200mm (min)(%) Elongation in 50mm (min) (%) |
60-80 415-550 32 220 21 25 |
(Minimum values unless stated otherwise)
To find out more about ASME SA516 Grade 60 and to receive a competitive quotation for the supply of this material, please CLICK HERE to contact us.
Equivalent grades :
Request a Callback :
Want to know more? Fill in the form below and click the button to contact us and we will call you right back...
| * Your name | : | |
| * Your company | : | |
| * Telephone no. | : | |
| * Country | : | |
| Steel required | : | |
|
|
Our Steel Products :
Please click on one of the links below...
Masteel UK Limited,
The Cedars, Coton Road,
Nether Whitacre, Coleshill,
Birmingham, West Midlands
B46 2HH
t: +44 (0)1675 437733
f: +44 (0)1675 437734
e–mail: enquiries@masteel.co.uk
website: www.masteel.co.uk
blogsite: www.masteel.ning.com