Section Links :
ASTM A516 Grade 60 is a boiler and pressure vessel quality steel which is ideal for moderate and lower temperature service.
The material is used extensively by industrial boiler and pressure vessel fabricators who provide manufacturing support to the oil, gas and petrochemical industry. The steel has good weldability and excellent notch toughness.
At Masteel UK Limited, we keep a healthy stock of ASTM A516 Grade 60 carbon steel plates. These plates come with mill certification in compliance with EN10204 3.1 or EN10204 3.2. and are hard stamped and fully traceable. Alternatively we can ship to you directly from the mill.
Please refer to the data tables below. Should your require a pressure grade steel with greater tensile and yield strength, please refer to ASTM A516 Grade 65 and/or ASTM A516 Grade 70.
(Maximum values unless stated otherwise)
(Minimum values unless stated otherwise)
(Please note: the technical information above is for guidance only – for exact specifications please check with our Sales Team)
To find out more about ASTM A516 Grade 60 and to receive a competitive quotation for the supply of this material, please CLICK HERE to contact us.
Please click on one of the links below...
Masteel UK Limited,
The Cedars, Coton Road,
Nether Whitacre, Coleshill,
Birmingham, West Midlands
B46 2HH
t: +44 (0)1675 437733
f: +44 (0)1675 437734
e–mail: enquiries@masteel.co.uk
website: www.masteel.co.uk
| Home Page Specification Our Grades |
: : : |
Pressure Vessel Steel Home Page ASTM A516 ASTM A516 Grade 60 | ASTM A516 Grade 65 | ASTM A516 Grade 70 |
ASTM A516 Grade 60 is a boiler and pressure vessel quality steel which is ideal for moderate and lower temperature service.
The material is used extensively by industrial boiler and pressure vessel fabricators who provide manufacturing support to the oil, gas and petrochemical industry. The steel has good weldability and excellent notch toughness.
At Masteel UK Limited, we keep a healthy stock of ASTM A516 Grade 60 carbon steel plates. These plates come with mill certification in compliance with EN10204 3.1 or EN10204 3.2. and are hard stamped and fully traceable. Alternatively we can ship to you directly from the mill.
Please refer to the data tables below. Should your require a pressure grade steel with greater tensile and yield strength, please refer to ASTM A516 Grade 65 and/or ASTM A516 Grade 70.
Table 1: Chemical Composition of ASTM A516 Grade 60
| Carbon (C) | % | Manganese (Mn) | % | Phosphorus (P) | % |
|
12.5mm or less 12.5 - 50mm 50 - 100mm 100 - 200mm > 200mm |
0.21 0.23 0.25 0.27 0.27 |
12.5mm or less • Heat Analysis : • Product Analysis : Over 12.5mm • Heat Analysis : • Product Analysis : |
0.6-0.9 0.55-0.98 0.85-1.20 0.79-1.30 |
(max) | 0.035 |
| Sulphur (S) | % | Silicon (Si) | % | ||
| (max) | 0.035 | • Heat Analysis : • Product Analysis : |
0.15-0.40 0.13-0.45 |
||
(Maximum values unless stated otherwise)
Table 2: Mechanical Properties of ASTM A516 Grade 60
| Description | Grade 60 |
|
Tensile strength (ksi) Tensile strength (MPa) Yield strength (ksi) Yield strength (MPa) Elongation in 200mm (min)(%) Elongation in 50mm (min) (%) Thickness (max)(mm) |
60-80 415-550 32 220 21 25 205 |
(Minimum values unless stated otherwise)
To find out more about ASTM A516 Grade 60 and to receive a competitive quotation for the supply of this material, please CLICK HERE to contact us.
Equivalent grades :
Our Steel Products :
Please click on one of the links below...
Masteel UK Limited,
The Cedars, Coton Road,
Nether Whitacre, Coleshill,
Birmingham, West Midlands
B46 2HH
t: +44 (0)1675 437733
f: +44 (0)1675 437734
e–mail: enquiries@masteel.co.uk
website: www.masteel.co.uk