Section Links :
Corten A – a weather resistant steel created by alloying copper, chromium and nickel. In addition to this, Corten A has added phosphorous which makes the material best suited for gas flue applications and for aesthetic facias The material is not recommended in heavy load bearing applications – in this case Corten B or S355J2W should be considered.
The top layer of the material reacts with atmospheric elements to form a rust coloured protective layer which not only makes the steel virtually maintenance free but also provides a pleasing and consistent finish.
Please refer to the technical specifications below...
Maximum values unless otherwise stated
(Please note: the technical information above is for guidance only – for exact specifications please check with our Sales Team)
For more information about Corten A weather resistant steel or to receive a prices and further specifications, please click here to CLICK HERE .
Want to know more? Fill in the form below and click the button to contact us and we will call you right back...
Please click on one of the links below...
Masteel UK Limited,
The Cedars, Coton Road,
Nether Whitacre, Coleshill,
Birmingham, West Midlands
B46 2HH
t: +44 (0)1675 437733
f: +44 (0)1675 437734
e–mail: enquiries@masteel.co.uk
website: www.masteel.co.uk
blogsite: www.masteel.ning.com
| Home Page Grades |
: : |
Weather Resistant Steel Home Page Corten Steel | Corten A | Corten B | S355J0WP | S355J0W | S355J2W |
Corten A – a weather resistant steel created by alloying copper, chromium and nickel. In addition to this, Corten A has added phosphorous which makes the material best suited for gas flue applications and for aesthetic facias The material is not recommended in heavy load bearing applications – in this case Corten B or S355J2W should be considered.
The top layer of the material reacts with atmospheric elements to form a rust coloured protective layer which not only makes the steel virtually maintenance free but also provides a pleasing and consistent finish.
Please refer to the technical specifications below...
Grades & Equivalents
| Corten | EN 10025-5:2004 |
| Corten A | S355 J0WP |
Chemical Composition
| Grade | C | Si | Mn | P | S | Al | V | Cu | Cr | Ni |
| Corten A | 0.12 | 0.25/0.75 | 0.20/0.50 | 0.07/0.15 | 0.030 | 0.015/0.06 | – | 0.25/0.55 | 0.50/1.25 | 0.65 |
Maximum values unless otherwise stated
Mechanical Properties
| Grade | Thickness (mm) Strip Products |
Plate Products | Yield Strength Rel N/mm² Minimum |
Tensile Strength Rm N/mm² Minimum |
Elongation A50 % Minimum |
| Corten A | 2 – 12 | 6 – 12 | 345 | 485 | 20 |
For more information about Corten A weather resistant steel or to receive a prices and further specifications, please click here to CLICK HERE .
Request a Callback :
Want to know more? Fill in the form below and click the button to contact us and we will call you right back...
| * Your name | : | |
| * Your company | : | |
| * Telephone no. | : | |
| * Country | : | |
| Steel required | : | |
|
|
Our Steel Products :
Please click on one of the links below...
Masteel UK Limited,
The Cedars, Coton Road,
Nether Whitacre, Coleshill,
Birmingham, West Midlands
B46 2HH
t: +44 (0)1675 437733
f: +44 (0)1675 437734
e–mail: enquiries@masteel.co.uk
website: www.masteel.co.uk
blogsite: www.masteel.ning.com