Section Links :
| Home Page Section Pages Services |
: : : |
Steel Services Home Page Profiling Services Flame Cutting | Laser Cutting | Water Jet Cutting | Plasma Cutting |
Waterjet profiling is a cost effective heat and gas free cutting method and will work successfully on any steel material.
The material is cut using a pressurised waterjet which can be anything between 30,000 to 60,000 pounds per square inch (PSI). This enormous amount of pressure allows for cutting of much greater material thicknesses. In the steel cutting process the water is mixed with abrasive garnet which enables the material to be cut to close tolerances.
The process yields very little heat and therefore there is no heat affected zone to speak of (HAZ). This in turn promotes a very accurate and detailed cut. Profiles can be cut up to a thickness of 200mm.
Our Waterjet Cutting Services :
| Application: | All Steels |
| Cutting Range: | Up to 200mm thickness |
| Cutting Area: | 6000 x 3000 |
For more information about waterjet cutting services supplied by Masteel UK Limited please click here to contact us.
Our Steel Products :
Please click on one of the links below...
Masteel UK Limited,
The Cedars, Coton Road,
Nether Whitacre, Coleshill,
Birmingham, West Midlands
B46 2HH
t: +44 (0)1675 437733
f: +44 (0)1675 437734
email: enquiries@masteel.co.uk
website: www.masteel.co.uk
blogsite: www.masteel.ning.com